Carpet tiles are squares of carpet — usually 50cm by 50cm — that are laid individually instead of as one large roll. They have a firm backing, they do not need stretching, and in most rooms they can be laid without covering the whole floor in glue. If one tile is stained or damaged, you lift that tile and replace it rather than the whole floor.
This guide explains how carpet tiles work, how they are installed, how to clean them, and when they are a better choice than broadloom carpet.
What makes a carpet tile different from ordinary carpet
Ordinary broadloom carpet arrives as a wide roll, is stretched over underlay and hooked onto gripper rods around the edge of the room. It is one continuous surface, so a bad stain in the middle is a problem you live with.
A carpet tile is a rigid square with its cushioning already built into the backing. It sits flat on the subfloor without stretching. That single difference is what makes tiles practical for a DIY installation, and what makes a damaged patch a five-minute fix instead of a new floor.
Do you need glue?
This is the question we are asked most, and the honest answer is: it depends on the room.
Most carpet tiles are laid with tackifier — a thin, permanently sticky adhesive rolled onto the subfloor. It holds the tiles in place but lets you lift and replace one without damage. It is the normal choice for homes and offices.
In small, low-traffic rooms, tiles can be laid loose or held with double-sided tape around the edges and at the doorways. That works for a study or a spare room. It does not work in a hallway or anywhere chairs roll, because the tiles will creep and open up gaps.
Full glue-down is used in heavy commercial settings where nothing can be allowed to shift.
Laying carpet tiles
Start by finding the centre of the room rather than working from a wall, because walls are rarely square and you want the cut tiles at the edges to be even on both sides. Dry-lay a row in both directions first to check how the cuts will fall.
Every tile has arrows on the back showing the pile direction. Laying all the arrows the same way gives a smooth, continuous look. Turning each tile a quarter-turn from its neighbour gives a subtle chequerboard effect that hides wear and marks better — which is why offices usually do it.
For the full method, read how to install carpet tiles.
Cleaning and looking after them
Vacuum regularly, the same as any carpet. For spills, blot rather than rub — rubbing pushes the stain down into the pile. Most marks come out with warm water and a mild carpet cleaner.
The advantage of tiles shows up with the stain that will not come out. Lift that tile, put a new one in its place, and the floor looks whole again. It is worth keeping a few spare tiles from the original batch for exactly this reason, because dye lots change between production runs.
Our article on how to clean carpet tiles covers the common stains.
Where carpet tiles work well
They suit home offices, studies, playrooms, rental properties, garages converted to living space, and any commercial room where the floor takes a beating. They are also the easier option for a room with an awkward shape, because you are cutting small squares rather than manoeuvring a heavy roll.
They are a sensible choice on a concrete slab, and they take a rolling office chair better than broadloom does.
Where they are not the right answer
In a formal living room or a main bedroom, broadloom carpet still looks more luxurious, because there are no joins at all. Tiles always have a visible grid if you look for it, though a good pattern hides it well.
Tiles are also not the answer for a wet area. For bathrooms and laundries, a waterproof floor is the right choice — see our vinyl flooring guide or the hybrid flooring range.
Carpet tiles or a hard floor?
Carpet is warmer and much quieter than any hard floor, which matters in an upstairs room or a home office on a phone call all day. It is also softer if anyone falls.
A hard floor is easier with pets and allergies, and it does not hold moisture. If you are weighing the two, comparing your flooring choices sets them side by side.
Where to start
Measure the room, add about ten per cent for cuts and spares, and decide whether the room needs tackifier or can be laid loose. Then choose the pile: a low, dense loop pile wears best in busy rooms, while a cut pile feels softer underfoot.
See the current ranges and prices on our carpet tiles page, or browse the full carpet range if you are still deciding between tiles and broadloom. You can also contact us with the room size and what it is used for.

