What Is Vinyl Flooring? A Complete Melbourne Guide

vinyl plank

Vinyl flooring is a man-made floor built in layers, with a printed design layer that can copy timber, stone or tile, and a clear wear layer on top that takes the daily punishment. It is fully waterproof, it is softer and quieter underfoot than most hard floors, and it is one of the least expensive ways to get a timber look in a wet room.

This guide covers what vinyl is, the different kinds you can buy, how it compares with laminate and hybrid, how it is installed and removed, and where it makes sense in a Melbourne home.

What vinyl flooring is made of

A vinyl plank or tile is built up in layers. At the bottom is a backing layer that gives the board its body. Above that sits the core. Then comes the printed design layer — a high-resolution photograph of timber grain, stone or concrete. On top of everything is a clear wear layer that protects the print from scratches and scuffs.

The thickness of that clear wear layer is the single most useful number when comparing two vinyl floors. A thicker wear layer lasts longer in a busy hallway or a shop. A thin one is fine in a spare bedroom.

The main kinds of vinyl

Vinyl planks and tiles are individual pieces, usually shaped like timber boards or stone tiles. Some click together like a floating floor, others are glued down to the subfloor.

Sheet vinyl comes in a wide roll and is laid in one piece across a room. Because there are almost no joins, it is a common choice for laundries and bathrooms.

Rigid core vinyl has a harder core that makes the board stiffer, so it bridges small bumps in the subfloor better and feels more solid underfoot. Hybrid flooring belongs to this family.

Click-lock or glue-down?

Click-lock vinyl floats over the subfloor — the boards lock into each other and are not fixed down. It goes in faster, it can be lifted again, and it suits most home rooms.

Glue-down vinyl is bonded to the subfloor with adhesive. It is the more stable of the two under heavy rolling loads and in very large areas, which is why shops, clinics and offices often use it. It also handles big temperature swings better, such as a sunroom.

If you are gluing, the adhesive matters as much as the floor. Our article on adhesive for vinyl flooring explains which type suits which job.

Is vinyl really waterproof?

Yes — the plank itself will not swell or be damaged by water, which is the main reason people choose it for bathrooms, laundries and kitchens.

One honest caution: waterproof planks do not make a waterproof room. Water can still get through the joins between boards, or around the edges, and sit on the subfloor underneath. In a genuinely wet area, sheet vinyl or a glued installation seals things far better than a floating click floor. Our article is vinyl flooring waterproof goes into this properly.

Vinyl, laminate and hybrid — what is the difference?

All three give you a timber look without real timber, and they are easy to confuse.

Laminate has a wood-based core. It is hard-wearing and usually the cheapest, but the core swells if water sits on it, so it is not the right choice for a bathroom.

Vinyl has a plastic core. It is fully waterproof and softer and quieter underfoot, though it can dent under very heavy furniture.

Hybrid sits between the two: a rigid waterproof core with a tougher surface, so it handles both water and wear. It usually costs more than either.

For a side-by-side comparison, read laminate vs hybrid vs vinyl, or vinyl flooring vs tiles if tiles are the other option you are weighing.

Where vinyl works well, and where it does not

Vinyl is a strong choice for bathrooms, laundries, kitchens, rental properties, and any home with pets or young children. It is warmer underfoot than tile, quieter than laminate, and a spill is simply wiped up.

It is less suited to rooms with very heavy fixed furniture that can leave permanent dents, and to homes where the owner specifically wants real wood that can be sanded and refinished. Vinyl cannot be refinished — when the wear layer is gone, the board is replaced.

Laying and removing vinyl

Preparation matters more with vinyl than with most floors. The subfloor must be clean, dry and flat, because a thin vinyl plank will telegraph every bump underneath it. Our guide on how to lay vinyl flooring covers the steps.

Taking old vinyl up is the job people underestimate, especially when it was glued. There is a practical method in how to remove vinyl flooring.

Keeping vinyl clean

Vinyl is one of the easier floors to look after. Sweep or vacuum to keep grit off the surface, and mop with a damp mop and a mild cleaner. Avoid harsh scouring powders and anything abrasive, which dull the clear wear layer over time. Felt pads under furniture prevent dents and scratches.

For the detail, see how to clean vinyl plank flooring.

Where to start

Decide first whether the room is wet or dry, because that settles click-lock against glue-down and sheet. Then compare wear layers rather than overall thickness — that is the number that predicts how the floor will look in five years.

See the current ranges and prices on our vinyl flooring page, or contact us with the room and the subfloor and we will point you at the right type.